Hungarian AMD-65/AMD-63 Gray-Blue Grip (Single) With Screw

Please read – these are pre-orders that reflect the number I will cast and not the number ready to ship.  

This is for one US hand made AMD-65/AMD-63 grip that is colored gray-blue.  It is marked “US” inside the top to signify it is a 922r part (when used as a rear grip – the front grip does not count one way or the other) and is cast as a solid block.

Wolff Gunsprings loaned me a gray-blue Hungarian butt stock for color matching.  Over the years, guys always told me these things were light blue or Robin’s egg blue.  Holding a real buttstock in my hand I would describe it as light to medium gray with a hint of blue.  Big difference.  Please note that my coloring is done by counting drops of dye so as the droplets sizes vary, the colors will vary slightly also.  If you are interested, click here for a blog post I did about “Hungarian Blue” color variations.

Also, the Hungarians made these very shiny / high-gloss.  I have carpal tunnel and can’t do the level of polishing necessary.  If you select the option on the product page for rough sanded, I will stop sanding at 180 grit and send the grip to you.  You would then do the 220, 400 and 800 grit sanding followed by buffing or polishing to get the level of gloss finish you want. The grip will arrive looking very light until you further sand and polish it.  You will need to apply a light wax to bring out the color.   Neutral or clear shoe wax works great but do not use something thich and heavy like floor wax.  If there are any oil/dark smudges on a grip from my inserting the grip screw and touching the grip with oil on my hands, they can be removed with soap/degreaser before sanding.

The other finishing option is our standard blasted matte finish which is duller and looks a tad darker since it isn’t reflecting light the same plus may have a bit of aluminum oxide embedded in it from my blaster but on the plus side, it will be ready use.

Pricing is for one pistol grip and screw.

Yes you can buy just one if you want. Please note, I cast the grips two at a time so the color matches in that pair.  If you buy a single grip, the color may not match if you later decide to buy a second one.  The reason for this, as I touched on above, is that the colors are done by counting dropletts of different colors of dye coming from a squeeze bottle.  The temperature and how hard I squeeze affect the size of the droplet so the colors are close but not exact across pairs of grips.

Photos showing a Hungarian butt stock and other grips are for illustration only and are not included.

This is a pre-order meaning that the quantity available is how many more I plan to make.  When you order, I will finish the grip(s) and shipped in about 2-4 weeks. You can cancel your order at any time before I mail it and get a full refund – no worries.