Yugoslavian M85/M92 Lower Handguard With Ferrule Cut
Click To Enlarge

This is our lower handguard for the M85/M92 series Yugo rifles and PAP pistols. It has the original cut for the use of a metal ferrule.  It's handy for folks who have an Ultimak gas tube and don't need another gas tube cover.  Its mold was made from an original wood lower so it is nice and thick which makes it both durable and very heat resistant.

The surface is finished with our blasted matte texture for a sure grip and the nose is left long so you can trim it for an exact fit.

The plastic is machinable so that means you can sand, mill, drill and so forth all you want.  This is very handy as you can add picatinny rails or other accessories however you want.  At this time, we plan on just selling the base model and leave customizing up to buyers and/or custom builders.

If you want to match the color of the handguards to the grips, select the same color and we'll come close.  They are available in the same colors as our handgrips such as black, dark olive drab. dark US plum, and many more.

This set does require the use of the metal ferrule that goes at the end of the lower handguard that abuts the receiver.  We sell replica ferrules or you can remove and use the ferrule from your existing furniture. Without the ferrule, the handguard will be loose fitting as it normally takes up space between the handguard, the retainer and the receiver.

** We are asked all the time "what is a ferrule?"  A ferrule is a metal cap that is used to protect the open grain of wood from being split open.  Since our handguards are made from urethane, having a ferrule is purely a cosmetic choice.  If you like the look of a metal cap, then buy the ferrule cut version.

You can purchase a replica Yugo ferrule to attach to the handguard from us.  It is made for us right here in the US!  It will be slide on the handguard and you can decide how you want to attach it.  We recommend either a rubber cement or epoxy.  You may also choose to just slip it on.

Our M85/M92 handguards have an extended nose that will likely require sanding/filing to fit your rifle.  This will give you a solid fit.  Use a sanding block or a file to remove material from the front nose only.  The trick is to take your time - remove a little and test over and over.  Do not try to do it all at once!!  I would recommend ordering it long so you can really custom fit the handguard to your rifle.

Please note that you can make shims to take up space in the front handguard retainer from any thin material if you need to.  It's as simple as cutting an outside circle of 1.5" and then an inside circle of 1".  It basically makes a "O" shape that has a 1/2" of material all the way around.  You then cut a wedge out of the top to open it up so it can set in the handguard retainer.  Literally, I've heard of guys using sheet metal, aluminum from pop cans, plastic, rubber and just about anything else you can imagine. 

We can not warrant these handguards to withstand the excessive heat caused by repeated mag dumps, bump firing and full auto activity.  We stand behind all our products 100% as users of our grips will tell you.  Given the potential for high-heat on the barrel and gas tube, we have to be up front and tell you there are limits.  In testing, East German plastic gas tube covers melt between 400 and 437F.  Our sample handguard sitting next to the East German cover at the same time only softened but never melted and then rehardened as it cooled.  We have a blog post with more information.

We custom make all of our grips and furniture for each order.  Because of this, our lead-time is usually at least four weeks and we post our order lead time on the home page of our website.  Please check the lead-time before ordering.  We had to add this as many folks are getting links from friends straight to our products and not realizing that we custom make everything. 

Please note:  We no longer make a version of our handguards that does not require a ferrule.  We only make this model now.


  • Item #: YugoM92LowerHGWithFerruleCut

Yugoslavian M85/M92 Lower Handguard With Ferrule Cut

Price: $66.00
* Marked fields are required.
Qty: *
Reviews (0) Write a Review
No Reviews. Write a Review