This is a heavy duty 1/2" stainless steel split ring that is black oxide finished.  It can be installed on any of our quick takedown pins if you want a ring smaller than the standard 1" ring that comes with the pins.

An increasing number of 1911 and 2011-style pistols are using a full length guide rod that requires the insertion if a pin to capture the reverse plug during disassembly. While some guys will fashion a pin from a paper clip, our solution is more...

Ok folks, we tried to have a pin made for a certain firearm and the design did not work out as planned. Now, we are sitting on a ton of quick takedown pins that have a diameter of 3.75mm that can range from 3.5-3.75mm. The working length between...

This is a heavy duty 3/4" stainless steel split ring that is black oxide finished.  It can be installed on any of our quick takedown pins if you want a ring smaller than the standard 1" ring that comes with the pins.

If you have ever tried to assemble an AK and install the trigger, you know how challenging it can be to keep the disconnector and spring assembly properly aligned while sliding in the trigger pin. We have a far simpler solution for you. We've...

This slave pin is used to assemble the trigger group outside of the AR so you could the trigger, disconnector and spring as a group. Once inserted in the lower, you push the normal trigger pin in and as it goes in, it pushes the slave pin out the...

Does having your krink's dust cover in the way when you are working on your weapon drive you nuts? If it does, you are like me. I have a Yugo M92 and developed a quick release pin for it. We found that the pin was too long for Bulgarian and Tula...

This new flat head pin replaces the dust cover hinge pin on the Zastava / Yugoslavian M85/M92 rifles and the corresponding Zastava PAP pistols to allow for rapid removal and does not have a pull ring - we have a model that does have the ring is...

This new flat head pin replaces the dust cover hinge pin on the Zastava / Yugoslavian M85/M92 rifles and the corresponding Zastava PAP pistols to allow for rapid removal and does not have a pull ring - we have a model that does have the ring is...

This quick takedown pin will work on either the Kashnikov USA KP-9 or the PSA AK-V. The design comes in handy for cleaning or other times you want clear access into the receiver without the dust cover being in the way. The pin is the same...

This pin replaces the dust cover hinge pin on the Vepr 12 to allow for rapid removal. The design comes in handy for cleaning or other times you want clear access into the receiver without the dust cover being in the way. The pin is the same...

This new pin replaces the dust cover hinge pin on the Zastava / Yugoslavian M85/M92 rifles and the corresponding Zastava PAP pistols to allow for rapid removal. The design comes in handy for cleaning or other times you want clear access into the...