1 - 16 of 16 items
Sort By:
1/2" Quick Takedown Pin Ring 1911 Grip Screw O-Rings - Set of 8 Rings
1/2" Quick Takedown Pin Ring1911 Grip Screw O-Rings - Set of 8 Rings

This is a heavy duty 1/2" stainless steel split ring that is black oxide finished.  It can be installed on any of our quick takedown pins if you want a ring smaller than the standard 1" ring that comes with the pins.

These O-rings can be inserted on your 1911 grip screws and help them from shooting lose by filling voids and applying tension from the rubber under load. These units will likely be single use - they wear each time the screw is torque down so that...

$3.99

$2.99

1911 Torx Head Grip Screws - Blued Finish w/Torx Key 3/4" Quick Takedown Pin Ring
1911 Torx Head Grip Screws - Blued Finish w/Torx Key3/4" Quick Takedown Pin Ring

What can I say - I like 1911 pistols but I don't like slotted screws. For 1911 grip screws I prefer Torx head screws both because of how they look but more importantly, you can tighten and loosen the screw without bending/deforming the slot. The...

This is a heavy duty 3/4" stainless steel split ring that is black oxide finished.  It can be installed on any of our quick takedown pins if you want a ring smaller than the standard 1" ring that comes with the pins.

$7.99

$3.99

AK 6x1x100mm w/12mm Head High Strength Alloy Grip Screw AK Fire Control Retainer Plates - These Are Excellent!
AK 6x1x100mm w/12mm Head High Strength Alloy Grip ScrewAK Fire Control Retainer Plates - These Are Excellent!

This is a high-strength 12.9 alloy screw for grips that have at least a 1/2"countersink. It follows the normal 6mmx1.0mm pitch x 100mm dimensions and has an oversize 12mm head that uses a hex key. This screw will work on all of our grips unless...

These are the best AK fire control group retainer plates I have found bar none and use them in my AKs. In many cases, the other vendors did plates that were too thin and this let the pins move around. Our plate is made from 304 stainless and is...

$6.00

(2)

$6.49

AK Trigger Slave Pin - Greatly Simplifies Trigger Installations AR Grip Screw - Allen/Hex Head Button Style with lock washer
AK Trigger Slave Pin - Greatly Simplifies Trigger InstallationsAR Grip Screw - Allen/Hex Head Button Style with lock washer

If you have ever tried to assemble an AK and install the trigger, you know how challenging it can be to keep the disconnector and spring assembly properly aligned while sliding in the trigger pin. We have a far simpler solution for you. We've...

This is a 1/4" x 28 thread pitch x 1" long alloy screw that has a allen/hex head button top that uses a 5/32" key. This will fit most AR-15 and AR-308 type rifles and pistols. Included with the screw is 1/4" external tooth lock washer. The reason...

$3.99

$2.99

AR Grip Screw - Allen/Hex Head Socket Style with lock washer Bulgarian and Tula Krinkov Quick Takedown Pin
AR Grip Screw - Allen/Hex Head Socket Style with lock washerBulgarian and Tula Krinkov Quick Takedown Pin
This is a 1/4" x 28 thread pitch x 1" long alloy screw that has a allen head socket top that uses a 3/16" key. This will fit most AR-15 and AR-308 type rifles and pistols. Included with the screw is 1/4" external tooth lock washer. The reason for...

Does having your krink's dust cover in the way when you are working on your weapon drive you nuts? If it does, you are like me. I have a Yugo M92 and developed a quick release pin for it. We found that the pin was too long for Bulgarian and Tula...

$2.99

$15.00

M4 Receiver End Plate With Two Sling Attachment Loops PSA AK-V 9mm Quick Takedown Pin
M4 Receiver End Plate With Two Sling Attachment LoopsPSA AK-V 9mm Quick Takedown Pin

This is for one AR-15 / M4 / AR-10 / LR-308 Receiver Extension Buffer Tube End Plate with Ambidextrous Sling Loops. These have a one year warranty to the original buyer and we will replace the plate if you have a problem. Again, this is just for...

This quick takedown pin replaces the dust cover hinge pin on the 9mm Palmetta State Armory (PSA) AK-V to allow for rapid removal. The design comes in handy for cleaning or other times you want clear access into the receiver without the dust cover...

$8.99

$15.00

Replacement M-Lok T-Nut and Screw - Two sets Vepr 12 Quick Takedown Pin
Replacement M-Lok T-Nut and Screw - Two setsVepr 12 Quick Takedown Pin

This is for two sets (meaning two screws and two nuts) of quality stainless T-Nuts and Screws for M-Lok attachment points. The screw head measures 0.3" Length of thread is 0.38" T-nut width is 0.43" T-nut height is 0.2" The stainless screw comes...

This pin replaces the dust cover hinge pin on the Vepr 12 to allow for rapid removal. The design comes in handy for cleaning or other times you want clear access into the receiver without the dust cover being in the way. The pin is the same...

$4.99

$15.00

Yugo-style Grip Screw Yugoslavian M85/M92 & PAP Pistol Quick Takedown Pin
Yugo-style Grip ScrewYugoslavian M85/M92 & PAP Pistol Quick Takedown Pin

I finally tracked down a supplier of Yugo/Zastava style grip screws with the big flat head and a lock washer.  These are the standard 6mm thread diameter, 1.0mm pitch and 100mm long.

This new pin replaces the dust cover hinge pin on the Zastava / Yugoslavian M85/M92 rifles and the corresponding Zastava PAP pistols to allow for rapid removal. The design comes in handy for cleaning or other times you want clear access into the...

$6.00

$15.00

(1)