Please note that the buyer is responsible for compliance with all applicable laws and regulations.

1 - 27 of 27 items
Sort By:
1/2x28 Heavy Barrel .223/5.56 Stainless Muzzle Brake 10/22 Squirrel CageMuzzle Brake for Standard Barrel - Used
1/2x28 Heavy Barrel .223/5.56 Stainless Muzzle Brake10/22 Squirrel CageMuzzle Brake for Standard Barrel - Used
I got this along with an AR upper some years back and the edges are a bit rough and could stand to be stoned and polished to get rid of some dings. Other than that, it is a striking looking brake meant to go on a heavy barrel AR. The round area...This was on my 10/22 and finally I wound up changing the barrel. It's in very good shape is very rugged as it is made from steel. It's held in place my one small set screw on the bottom. It slides over the barrel and the existing front sight nestles into the groove on the top of the brake.

$29.99

$4.99

BALS Mk 2 Sniper Bean Bag - Black, Right Hand - Excellent shape CNCSights - Handgun Sight Pusher Tool for Parallel Slides
BALS Mk 2 Sniper Bean Bag - Black, Right Hand - Excellent shapeCNCSights - Handgun Sight Pusher Tool for Parallel Slides
The Ballistic Adjustment Leveling Systems (BALS), LLC makes this sniper bean bag system. It is very heavily made and the "sock" that is filled with corn cob media can be "hooked" out of the way on the opposite side of a right-hand shooter's...I bought this but never used it. It is made in the USA by CNCSights. The tool is for removing or adjusting dovetail sights on Glocks, 1911 and other models of handguns with parallel sided slides. It does not work on XD,XDM or any other slide with angled or notched sides

$74.99

$34.99

Magpul PMAG 5 7.62 AC Strap on adjustable cheek piece system - camouflage
Magpul PMAG 5 7.62 ACStrap on adjustable cheek piece system - camouflage
The PMAG 5 7.62 AC is a reliable and durable polymer magazine for .308 Winchester based family of cartridges and is compatible with short action AICS-spec bottom metal, to include the Bolt Action Magazine Well for the Hunter 700 Stock . Featuring...

Unknown maker adjustable cheekpiece system.  It has a bit of cushion under the cheek side plus a zippered pocket and removable ammo carrier on the opposite side.  It's right hand only.  

$33.20

$9.99

Yugo M72B1 Gas Tube - Stripped - Excellent Condition Yugo M72B1 Gas Tube With Wood Cover - Great Shape
Yugo M72B1 Gas Tube - Stripped - Excellent ConditionYugo M72B1 Gas Tube With Wood Cover - Great Shape
This stripped Yugo M72B1 gas tube is in excellent shape - no rust and the finish is in great shape. It's stripped meaning there is no gas tube cover for it. One of the photos shows the stripped gas tube with sample M72 (shorter) and M70 (longer)...

This gas tube assembly is off a Yugo M72B1 parts kit. The wood shows its age and has a couple of very small dings that would sand out. The gas tube itself is in excellent shape. The finish is worn but there is no visible rust inside or outside....

$35.00

$29.99

AMD-65 Wire Stock Assembly With Recoil Pad Fox Tactical Black Rifle Buttstock Cheek Rest #55-481
AMD-65 Wire Stock Assembly With Recoil PadFox Tactical Black Rifle Buttstock Cheek Rest #55-481

This is for a Hungarian AMD-65 Wire Folding Stock Assembly with Recoil Pad - Just what is shown.

The black Fox Tactical 55-481 is a decent 8"x4.5" cheek rest with some some additional features:

  • Non-slip padded cheek rest
  • 2 hook & loop attached strips with elastic loops
  • Zippered utility pouch

$24.00

$9.99

Kalashnikov USA 5-Rnd 12 Gauge Magazines for Saiga/Lynx Shotguns M&P 15-22 Original Black Plastic Handguard - Like New
Kalashnikov USA 5-Rnd 12 Gauge Magazines for Saiga/Lynx ShotgunsM&P 15-22 Original Black Plastic Handguard - Like New

I bought a couple of these 12 gauge Saiga-style 5-Round magazines by Kalashnikov USA. These are new even though they are out of the bag. Price is per magazine. Buyer certifies that he/she can legally purchase and own these magazines. Buyer is...

This came off a 15-22 that I converted years ago and has just been sitting in a box. It is the main body. I think there was a cap that went on the muzzle end but I don't have it. I may even be remembering the configuration incorrectly but want to be up front. This handguard is like new.

$27.99

$7.99

MagLula Uzi Magazine Loader/Unloader Magpul PMAG 10 LR/SR Gen 3 7.62/.308 Magazines
MagLula Uzi Magazine Loader/UnloaderMagpul PMAG 10 LR/SR Gen 3 7.62/.308 Magazines

I used this to load about 500 rounds.  It works great.  I'm selling it because I sold my Uzi.

The 7.62x51 NATO (.308 Winchester) PMAG 10 LR/SR GEN M3 is a lightweight, cost effective, high reliability magazine for SR25/M110 pattern rifles in the smallest possible magazine size. These may have the bag opened but are unused. I bought them for a project but never did it.

$24.00

$18.00

Midwest Industries SSG2 4.5" Aluminum Rail Section Pachmayr Decelerator 200B Recoil Pad - Part 00426
Midwest Industries SSG2 4.5" Aluminum Rail SectionPachmayr Decelerator 200B Recoil Pad - Part 00426

This is a new Midwest Industries SSG2 4.5" Aluminum Rail section for the MI SSG2 handguard.  This was ordered for a project and never used.

This is new old stock and has never been out of its blister pack. It's a Pachmayr 20oB Decelerator Grind to Fit recoil pad. Pachmayr part number 00426 1/2" thick 5.40" tall 1.95" wide 3.10" hole spacing

$6.39

$14.99

Uzi Handguards - Used Uzi Semi Auto Selector Stop Plate - Weld In
Uzi Handguards - UsedUzi Semi Auto Selector Stop Plate - Weld In

This is for one set of Uzi handguards - I have several sets for sale and they all show wear.  The photos are representative and what you get may differ slightly.

This is the size you need to stop the uzi selector lever so it can't go past semi-automatic.  It simply welds in place.  I bought two and did not use this one.

$9.99

$4.99

Uzi Top Cover - Semi Auto Uzi Wood Stock Butt Plate Assembly
Uzi Top Cover - Semi AutoUzi Wood Stock Butt Plate Assembly

Semi auto Uzi top cover - this means the knob slides freely from front to back and does not have the ratchet mechanism the full auto version does.  It's in great shape.

Original IMI Uzi Butt Plate - Sticky with Cosmoline.  Ought to clean up very well.

$19.99

$14.95

Yugo M70/M72/M92 Fire Control Group - Excellent Shape Yugoslavian M72B1 Bipod Legs and Spring
Yugo M70/M72/M92 Fire Control Group - Excellent ShapeYugoslavian M72B1 Bipod Legs and Spring
These sets include the: - Hammer - Trigger - Disconnector - Rate Reducer - Shepherd's Hook Spring - Rate Reducer Spring It does NOT include a hammer spring, disconnector spring or sear. Just what you see in the photo.

This pair of Yugoslavian / Zastava M72B1 bipod legs and spring came off a kit that became a carbine.  This is just what you see - the two legs, one with the connecting pin and the spring.

$19.99

$29.99

4" Aluminum Picatinny Rail Section - Pair with Screws 6" Aluminum Picatinny Rail Section - Pair with Screws and Key
4" Aluminum Picatinny Rail Section - Pair with Screws6" Aluminum Picatinny Rail Section - Pair with Screws and Key

I picked up these 6" long x 3/8" tall picatinny rail sections to experiment with years ago. Genuine Chinese imports. I have no idea what they were actually supposed to go to put come with screws and a hex key. This price is for a pair.

I picked up these 6" long x 3/8" tall picatinny rail sections to experiment with years ago. Genuine Chinese imports. I have no idea what they were actually supposed to go to put come with screws and a hex key. This price is for a pair.

$7.59

$7.99

B-Square Remington 870 Saddle Scope Mount Magpul XTM Rail Covers - 4 pieces
B-Square Remington 870 Saddle Scope MountMagpul XTM Rail Covers - 4 pieces

This is a saddle scope base for a Remington 870. You use the pins in the mount in place of your trigger pins and the mount is secured. I had it on my Remington 870 12 gauge express with a shotgun scope for slugs for a while. After a few years I...

This new package has four snap together MagPul XTM Picatinny Rail Covers

$9.99

$6.39

Sims Limbsaver #10112 for Remington, Ruger, Park Hale & More
Sims Limbsaver #10112 for Remington, Ruger, Park Hale & More

This is a new Limbsaver model 10112 recoil pad that fits a variety of rifles. Click here for the Sims firearm produt catalog that covers fitting on page 33. This model can fit a number of different firearms so you really need to use their catalog...

$35.00