We have stopped production of most of our custom furniture.  What we are still making or have available for sale is listed under custom furniture  We will post lead times on our home page and our Facebook page.  Please check them before ordering. 

For ferrules, pins, FCG plates and stuff in our surplus section, I'll try and ship your order within two weeks. 

If you'd like to know more about waxing your grips and handguards to keep the color from fading, then click here.

Please note that if you clicked on a link to a product on a web page somewhere and this page was displayed, then that means we aren't making the product any longer.

1 - 10 of 10 items
Sort By:
AK 6x1x100mm w/12mm Head High Strength Alloy Grip Screw Bulgarian ARM-9 Original Design With Selector Notch and Screw
AK 6x1x100mm w/12mm Head High Strength Alloy Grip ScrewBulgarian ARM-9 Original Design With Selector Notch and Screw

This is a high-strength 12.9 alloy screw for grips that have at least a 1/2"countersink. It follows the normal 6mmx1.0mm pitch x 100mm dimensions and has an oversize 12mm head that uses a hex key. This screw will work on all of our grips unless...

After many requests, we now have our version of the next generation Bulgarian Grip that is used on the AR-M12F, AR-M8F, AR-M4SF, AR-M1F41 and AR-M9 rifles (among others) with the original selector notch! We offer a custom version with the notch...

$6.00

(2)

$49.99

IMI Galil Grip with Screw Yugo M70/M72/M76 Wood Buttstock bolt - 8x1.0x260mm w/lockwasher
IMI Galil Grip with ScrewYugo M70/M72/M76 Wood Buttstock bolt - 8x1.0x260mm w/lockwasher

This is our US-made black solid cast version of the grip used on the IMI Galil rifles. There is a dimple marking the hole for the cross pin *if* you need to drill it for your particular rifle. Because not all Galil variants used the cross pin, we...

Folks, I finally had a custom screw shop make the bolts needed to secure the wood fixed butt stocks on Yugoslav / Zastava military M70, M72 and M76 rifles. It is an 8mm diameter bolt with a 1.0mm pitch and is 260mm (10.24") long just like the...

$49.99

$8.99

Yugo M72B1 Handguard Set - No Ferrule Needed Yugo recoil pad screws - black stainless slotted (per pair)
Yugo M72B1 Handguard Set - No Ferrule NeededYugo recoil pad screws - black stainless slotted (per pair)

This is our Yugo M72B1 RPK handguard set ( both the lower and the upper ). It is cast in our high-temp glass fiber reinforced plastic and it will not require a ferrule because the M72 ferrules are unique, you will not find them anywhere and our...

Guys have asked us over and over for a cost effective replacement to the Yugo recoil pad screws and now we have them. They are not identical to the originals in terms of the thread but once installed, they look the same from the outside and they...

$88.00

$2.24

Yugo-style Grip Screws - New Custom Made Black Stainless Yugoslavian Ferrule Replica for M70, M77, M85 & M92
Yugo-style Grip Screws - New Custom Made Black StainlessYugoslavian Ferrule Replica for M70, M77, M85 & M92

These are custom made Yugo/Zastava-style grip screws with the big flat head and a lock washer. These are the standard 6mm thread diameter, 1.0mm pitch and approximately 100mm long -- about 96mm shaft and a 3.5-4mm thick head. These were used in...

These are replicas of the Yugo ferrules for the M70, M77, M85 and M92 rifles (and their civilian PAP versions) that we had made for us here in Michigan and are finished with a nice rich black oxide finish. I am unaware of any other country's...

$6.49

$25.00

Yugoslavian M70/M72/M76 Rubber Recoil Pad Yugoslavian M85/M92 and PAP Pistol Lower Handguards Steel Shims
Yugoslavian M70/M72/M76 Rubber Recoil PadYugoslavian M85/M92 and PAP Pistol Lower Handguards Steel Shims

The military-sized recoil pad we sell will not fit the current PAP M70 buttstocks that have a steel butt plate. This is a replica recoil pad for the military M70, M72 and M76 fixed stock rifles. It is cast from originals and has the same...

Tired of loose Yugo M85, M92 or PAP pistol handguards? We are pleased to now offer solid steel shims so you can finally get the tight solid fit with your lower handguard that you have wanted. These shims are specifically for the M85, M92 and PAP...

$34.99

$12.99