This is a 1/2" steel crush washer. It's most common use is on 5.56/.223 ARs as well as other rifles and pistols. Be sure to confirm the size of washer by measuring your barrel and/or what the maker tells you. Pricing is per washer and there are...

This is a 49/64ths" steel crush washer. It's most common use is on .50 Beowulf ARs as well as other rifles and pistols. Pricing is per washer and there are volume discounts. Approximate dimensions: Inner diameter: 0.759" Outer diameter: 0.953"...

This is a 49/64ths" steel crush washer. It's most common use is on .50 Beowulf ARs as well as other rifles and pistols. Be sure to confirm the size of washer by measuring your barrel and/or what the maker tells you. Pricing is per washer and...

This is a 5/8" steel crush washer. It's most common use is on 7.26/.308 and a number of big bore ARs as well as other rifles and pistols. Be sure to confirm the size of washer by measuring your barrel and/or what the maker tells you. Pricing is...

This is a 1/4" x 28 thread pitch x 1" long alloy screw that has a allen/hex head button top that uses a 5/32" key. This will fit most AR-15 and AR-308 type rifles and pistols. Included with the screw is 1/4" external tooth lock washer. The reason...

This is a 1/4" x 28 thread pitch x 1" long alloy screw that has a allen head socket top that uses a 3/16" key. This will fit most AR-15 and AR-308 type rifles and pistols. Included with the screw is 1/4" external tooth lock washer. The reason for...

These wedges are designed to push an AR upper receiver upwards to remove slack that can cause the upper to wiggle and lose accuracy during firing. It is made from a syntheticr ubber and can be sanded/trimmed to fit if needed. Many times it drops...

This is a Mil-Spec bolt catch plunger.  It sits on top of the spring and applies pressure to the bolt catch.

Made in the USA.

This is a Mil-Spec bolt catch spring.  It applies pressure to the bolt catch plunger in AR-15 and LR-308 lowers.

Made in the USA

This is the retainer that keeps the buffer in it's tube.  It's a Mil-Spec Part

Made in the USA!

This is a Mil-Spec spring that sits in the receiver and pushes the buffer retainer upwards.

Made in the USA!

This is a Mil-Spec buffer spring for AR/M4 carbines and pistols with a carbine length tube.

Made in the USA!

This is an H1 buffer for the AR/M4 carbine rifles and pistols that use buffer length tubes,  It uses tungsten weights and weighs approximately 3.9oz

This is Mil-Spec sized.

Made in the USA!

This is an H2 buffer for the AR/M4 carbine rifles and pistols that use buffer length tubes,  It uses tungsten weights and weighs approximately 4.7oz

This is Mil-Spec sized.

Made in the USA!

This is an H3 buffer for the AR/M4 carbine rifles and pistols that use buffer length tubes,  It uses tungsten weights and weighs approximately 5.4oz

This is Mil-Spec sized.

Made in the USA!

Mil-Spec replacement part for the ejector and safety selector detent spring for AR-15 and M4 rifles/pistols.

This extended model replaces the original mag release button and protrudges slightly more making it easier to find and push. The surface is knurled as well. It screws on just like the original but has a closed top so you thread it on until the...

This pin set includes both the rear takedown and front pivot pins.  They are CNC machined from steel and have extended heads/knobs to allow for easier gripping to pull them open. 

Made in the USA!

This is a Mil-Spec magazine release spring for AR-15 and LR-308 type rifles and pistols.

Made in the USA.

This is a Mil-Spec magazine release button that will fit AR-15 and LR-308 type rifles and pistols.

Made in the USA.

This is a Mil-Spec receiver end plate that orients the buffer tube vertically for AR-15/M4 and LR-308 carbines and pistols.

Made in the USA!

This is a Mil-Spec steel "castle nut" for locking the AR/M4 carbine's receiver extension/buffer tube in place.

Made in the USA!

This is a Mil-Spec safety selector - sometimes called the selector switch or selector lever.  It will fit AR-15, AR-10 and LR-308 type rifles and pistols.

Made in the USA.

This is a Mil-Spec detent that goes on top of the safety selector spring on AR-15 and LR-308 type rifles and pistols.

Made in the USA!

Mil-Spec springs for the AR-15 and LR-308 takedown and pivot pin detents.

Made in the USA!

This is for one AR-15 / M4 / AR-10 / LR-308 Receiver Extension Buffer Tube End Plate with Ambidextrous Sling Loops. These have a one year warranty to the original buyer and we will replace the plate if you have a problem. Again, this is just for...

This is for two pairs (meaning two screws and two nuts) of quality stainless T-Nuts and Screws for M-Lok attachment points. The screw head measures 0.3" Length of thread is 0.38" T-nut width is 0.43" T-nut height is 0.2" The stainless screw comes...