.jpg)
These are new AR-15 / M4 parts that will fit AR-10 and LR-308 in many cases as well.
|
|
| AR Firing Pin | Crush washer - 1/2", common for 5.56/.223 ARs and others |
This is a Mil-Spec chrome plated stainless steel firing pin for AR-15 rifles and pistols. Made in the USA! | This is a 1/2" steel crush washer. It's most common use is on 5.56/.223 ARs as well as other rifles and pistols. Be sure to confirm the size of washer by measuring your barrel and/or what the maker tells you. Pricing is per washer and there are... |
$4.99 | $3.99 |
|
|
| Crush washer - 3/4", common for 12.7x42 and others | Crush washer - 49/64", common for .50 Beowulf and others |
This is a 49/64ths" steel crush washer. It's most common use is on .50 Beowulf ARs as well as other rifles and pistols. Pricing is per washer and there are volume discounts. Approximate dimensions: Inner diameter: 0.759" Outer diameter: 0.953"... | This is a 49/64ths" steel crush washer. It's most common use is on .50 Beowulf ARs as well as other rifles and pistols. Be sure to confirm the size of washer by measuring your barrel and/or what the maker tells you. Pricing is per washer and... |
$4.99 | $7.99 |
|
|
| Crush washer - 5/8" common for 7.62/.308 ARs and other weapons | AR Grip Screw - Allen/Hex Head Button Style with lock washer |
This is a 5/8" steel crush washer. It's most common use is on 7.26/.308 and a number of big bore ARs as well as other rifles and pistols. Be sure to confirm the size of washer by measuring your barrel and/or what the maker tells you. Pricing is... | This is a 1/4" x 28 thread pitch x 1" long alloy screw that has a allen/hex head button top that uses a 5/32" key. This will fit most AR-15 and AR-308 type rifles and pistols. Included with the screw is 1/4" external tooth lock washer. The reason... |
$3.99 | $2.99 |
|
|
| AR Grip Screw - Allen/Hex Head Socket Style with lock washer | AR trigger slave pin - makes installation a breeze |
This is a 1/4" x 28 thread pitch x 1" long alloy screw that has a allen head socket top that uses a 3/16" key. This will fit most AR-15 and AR-308 type rifles and pistols. Included with the screw is 1/4" external tooth lock washer. The reason for... | This slave pin is used to assemble the trigger group outside of the AR so you could the trigger, disconnector and spring as a group. Once inserted in the lower, you push the normal trigger pin in and as it goes in, it pushes the slave pin out the... |
$2.99 | $3.99 |
|
|
| AR Upper Receiver Wedge, Red Synthetic Rubber | AR/M4 Bolt Catch Plunger / Detent |
These wedges are designed to push an AR upper receiver upwards to remove slack that can cause the upper to wiggle and lose accuracy during firing. It is made from a syntheticr ubber and can be sanded/trimmed to fit if needed. Many times it drops... | This is a Mil-Spec bolt catch plunger. It sits on top of the spring and applies pressure to the bolt catch. Made in the USA. |
$2.99 | $1.99 |
|
|
| AR/M4 Bolt Catch Spring | AR/M4 Buffer Retainer |
This is a Mil-Spec bolt catch spring. It applies pressure to the bolt catch plunger in AR-15 and LR-308 lowers. Made in the USA | This is the retainer that keeps the buffer in it's tube. It's a Mil-Spec Part Made in the USA! |
$1.99 | $1.99 |
